Storm Water Management &Treatment Systems
The Bio-Storm® system clarifies storm water, snow melt and run-off water by removing coarse grit, fine sediment, hydro-carbons, oils and other suspended solids. The resulting clarified water is safely re-entered into the environment.
Bio-Storm® remains effective even in heavy surges, because it is designed to allow excess water to bypass, while continuing to capture pollutants and treat incoming flow at full design capacity. The system is easy to maintain and can be used in a variety of applications and sizes.
Simple, Modular, Effective.
Pre-engineered storm water management & treatment system removes trash, sediment, oil and other pollutants from storm water runoff. The BioSTORM®’s unique off-line design consists of a patented StormTEE® self-cleaning deflector screen and a modular separation/coalescing unit, all housed in readily-available precast concrete tanks. The versatility of the system allows components to be used separately for different applications, or together to form a complete BioSTORM® system. Various sizes are available depending on local site and environmental considerations.
Variable flows, consistent treatment
Whether a light rain, or a heavy storm, BioSTORM® storm water management system’s retention of pollutants remains consistent. The unique design of the system does not rely on velocity of flow/particles to maintain high levels of liquid/solids separation. When the system is sized within proper design capacity, BioSTORM maintains consistently high- level removal of particulates, regardless of surge flows or particle velocities. In the event of heavy stormwater flows beyond design capacity, excess water bypasses BioSTORM® assuring full flow of water through the storm sewer. Even while the excess flow is bypassing the system, BioSTORM® continues to capture pollutants and treat incoming flow at full design capacity.
BioSTORM® storm water management system’s maintenance is very easy. Simply remove the manhole covers from each tank, insert the vacuum hose and start pumping out the oil floating inside the BioSTORM® separation module. Once the oil is removed, pump out the solids from each tank or compartment. When the StormTEE® deflector screen is used, swiftly raise and lower the internal swab to dislodge any debris that may be stuck to the screen.
BioSTORM® Storm Water Management System Benefits
- Pre-engineered system removes trash, sediment, oil and other suspended solids
- Maintains treatment performance regardless of hydraulic surge flows
- Unique modular design provides efficient liquid/solids and oil/water separation
- Easy to install in pre-cast concrete tanks
- Easy to maintain, requires only periodic removal of debris
To contact us over the phone, call our toll-free line 1-866-514-7555, or fill out the form below